wedge angle

英 [wedʒ ˈæŋɡl] 美 [wedʒ ˈæŋɡl]

网络  楔角; 楔形角; 后跟面角度; 楔形刀角

机械



双语例句

  1. Symmetrical loading it into a box the best wedge angle about the formation of a mirror-style unobtrusive listening right.
    把它对称的箱体装成一种最佳的楔形角度,形成一种不引人注目的左右镜面式监听对。
  2. The device adopts folding wedges and works in three different BHF curves by varying the wedge angle.
    该装置采用双斜楔结构,通过改变斜楔角度便能实现三种类型的压边力变化。
  3. For the leading edges of same radius, the larger leading edge wedge angle causes the smaller laminar separation bubble.
    前缘圆弧半径相同而前缘楔形角不同的叶片,在同一工况下,前缘楔形角越大分离泡越小,流动分离越弱。
  4. This paper presents some illustrative evaluating examples of asymptotic singular stress fields and displacements fields surrounding the arbitrary wedge tip including the most important crack case when the wedge angle if 360 degrees.
    文中运用该方法给出了若干有关任意形状楔形体尖端附近近似奇性应力场和位移场分布的算例,其中,当然包括最重要的裂纹情形,此时楔形体张开角度为180°。
  5. Generally, for certain energy and field size, the wedge factor of larger wedge angle was slightly larger than smaller wedge angle.
    对于特定能量和照射野,大楔形角楔形因子较小楔形角略大;
  6. Investigation about Effect of Flash Groove Wedge Angle of Forging Dies on Filling Ability
    锻模毛边槽楔角对充满性影响的研究
  7. But an useful conclusion is that when the wedge angle of the matrix is less than a critical angle, the singularity of stress field at the interface end of the specimen in micro-debond test nearly disappears.
    但从文献[1]关于微珠脱粘试验研究的结论中可以发现当基体的楔形角小于某临界角度后,微珠试件界面端应力奇异性几乎消失。
  8. Objective To describe a method which can optimize beam weight, wedge angle, and wedge orientation simultaneously by combining the super-omni wedge ( SOW) concept with the function of beam weight optimization provided by a commercial treatment planning system.
    目的运用超全向楔形板概念,结合计划系统优化照射野权重的功能,来同时优化照射野权重、楔形板角度和方向。
  9. The virtual wedge was almost equal to 1, with a maximal variation of 0.031 no matter what the value of beam energy, field size or wedge angle was.
    不论射线能量、照射野大小和楔形角大小,虚拟楔形板楔形因子总是约等于1,最大偏离为0.031;
  10. Wedge angle line-oblique angle and its measurement
    楔形角、线倾角及其测量
  11. Conclusions The four point method measurement for virtual wedge angle is good for daily QA.
    结论4点法测量虚拟楔形板楔形角可作为日常质量保证手段。
  12. In this paper a method for measuring the optical wedge angle, by the lapping of Moire fringe when two noncoherent beams are incident, is introduced.
    本文介绍利用在两束互不相干光作用下的两套莫尔偏折条纹的重迭与否来测量光楔楔角的方法。
  13. This Paper Presented a simple method for measuring wedge angle between end-faces of crystal bar used in microwave delay lipe.
    本文介绍了一种简便的测量微波延迟线所用晶棒两端面间楔角大小的方法。
  14. A Simple Method to Measure the Wedge Angle of a Beam Splitter that Relier on Moire Technique
    一种用莫尔技术测量分光板夹角的简易方法
  15. The numerical examples are provided to show the influences of the material properties, the wedge angle, dislocation position and the crack length on the interaction.
    最后通过数值算例,针对不同问题讨论了材料常数、楔口角度、裂纹长度对相互作用的影响。
  16. Measurement of refractive index and wedge angle of wedge-shaped medium
    楔形介质的折射率及楔角的测量
  17. The formula of wedge angle is deduced under the condition of two-beam interference.
    在考虑双光束干涉的情况下,导出测量平板楔角的公式;
  18. A profound analysis is given on the photics principles of biprism in the biprism interference experiment. It further discusses the improvement on the accuracy in measuring wavelength. And it finally discusses the measuring methods of biprism wedge angle and refractive index.
    对双棱镜干涉实验中双棱镜的光学原理进行较深入的分析,探讨提高波长测量准确度的问题,以及双棱镜的楔角和折射率的测量方法。
  19. Measuring Wedge Angle of Double Prism by Fringes of Shearing Interference
    用剪切干涉条纹测双棱镜的折射棱角
  20. This instrument can also measure the refractive-index homogeneity, the flatness, the angle error, the wedge angle of crystal element.
    仪器还可测量晶体材料折射率均匀性、晶体元件面形、角度、平行度等。
  21. Absolute Measurement of a Small Wedge Angle with Common Path Interference
    共光路干涉式微小楔角的绝对测量
  22. The Optimum Design of Wedge Angle of Limited-Slipping Differential
    限滑差速器楔角的最优化设计
  23. The principle of collimation is analyzed. The influence of the small wedge angle of the plane parallel plate and the lateral shearing width upon judging laser collimation are discussed.
    分析了准直原理,讨论了平行平面板楔角和横向位错宽度对准直判断的影响。
  24. The influence of the compressor blade leading edge wedge angle on the leading edge separation bubble
    压气机叶片前缘楔形角对前缘分离泡的影响
  25. The variation law of the wedge angle of V belt with the effect of bending stress is analyzed in this article.
    分析了V带在弯曲应力作用下楔角变化的规律,为使带楔面与轮槽更有效地接触,建立了V带带轮轮槽角与带轮基准直径的函数关系式。
  26. The paper analyzes the sliding of the straightener of 8 MN tension at the clamp during extension and gets the idea that the main reason is the influence of the slide wedge angle and puts forward some measures to be taken.
    分析8MN张力矫直机在拉伸过程中经常出现的钳口打滑问题,其钳口打滑的主要原因是斜滑块角度的影响,分析影响斜滑块角度的因素,并提出解决措施。
  27. Measurement of wedge angle of plate using interference of point light source
    利用点光源干涉测量平板的楔角
  28. The influencing law of structure and contact characteristic of rubber strip is discussed in this article and the formation of water film wedge angle and water sac is analyzed from the point of strip deformation.
    探讨了结构对橡胶板条接触性能的影响规律,从板面变形的角度分析水膜楔角、水囊的形成机理。
  29. A simple device, that can form continuously changed Mach number flow only by adjusting the wedge angle, was designed availing the theory of shock wave reflection.
    利用消波反射波系的基本原理,设计了一种只需要调节楔板角度就可以实现马赫数连续变化。